In any type of ultra clear and accurate cross line projection at different work distances, not able to rely on any prior cross line drawing or printing work, it would be a much better solution to operate a high density beam emitted tool of a 635nm red cross line laser module. When it applies an import 635nm red laser diode and qualified glass coated lens with different fan angles inside a durable metal housing tube, it is getting highly efficient conversion of ultra clear and fine two perpendicular red lines generation with accurate 90 degrees. When red cross laser is used for multiple wood processing machinery, it is working well as an accessory part, and making good job for high precision cross line assistance for single-blade longitudinal saw machine, multi-blade longitudinal saw machine, four-side saw, sliding table saw, etc., mainly used for auxiliary marking and positioning.
The usual cross line projection work is processing for a quite long time, for the most important of all, it applies an import 635nm red laser diode within 5mW to 100mW and high power up to 150mW to 500mW as its beam emitting source. When it is used for wood processing, in order to maintain its long time lasting cross line projection, it just applies an inner metal heat sink cooling system, which enables superior nice heat dissipation and ultra long time lasting red vertical and horizontal lines generation for multiple working occasions and other ambient lighting occasions etc. This red cross laser alignment tool enables up to 10 hours per day continuous cross line projection, without effect by overheating and over current impact as well.
Being made with a qualified glass coated lens within 10, 15 and 110 degree fan angles, only if 635nm red cross line laser module gets constant electric power source supply, it generates highly straight and fine two perpendicular red lines with accurate 90 degrees and different line lengths within 0.5 meter to 6 meters in use. Together with its adjustable focus optic lens design, the red laser beam has good collimation and high straightness, thus red cross laser alignment can provide accurate positioning reference for woodworking processing, and can achieve millimeter-level accuracy, ensuring that cutting, splicing and other operations are carried out according to the preset position, improving processing accuracy.
According to its inner designed APC, ACC driving circuit board, the usual use of a 635nm red cross line laser module always gets high performance red laser light emission with strong anti-interference. It can work in an environment of -10℃-75℃, which can effectively ensure the stability and service life of the product in harsh woodworking processing environments, and the continuous use time is greater than 8000 hours. The red laser light with a wavelength of 635nm is clear and bright, soft and not dazzling. In the light environment of the woodworking workshop, red cross lines can be clearly seen even at a long distance, which is convenient for operators to observe.
Owing to its special use of 16mm, 18.9mm and 26mm diameter tube design for different output power range, usually 635nm red cross line laser module is used as an accessory part, mounted or installed easily onto the vertical or horizontal surface of the woodworking machinery,and can be adjusted 360 degrees in three-dimensional space to achieve the best use effect, and is suitable for woodworking machinery of different models and structures. There is laser marking when the power is on, and there is no laser marking when the power is off. There is no need for complicated operation procedures, which is easy for workers to use, and can reduce labor costs and operation difficulties. Not any longer spending extra time on manual cross line drawing, this red alignment laser can project red cross line instantly without touching the wood, and can quickly determine the processing position, reduce preparation time, and improve the efficiency of woodworking processing.
View more: https://www.berlinlasers.com/635nm-red-cross-line-laser-module