Itscnc · Newsroom

ITSCNC Introduces the PUL-0099 – Spindle Pulley, 15K Polychain: A Precision-Engineered OEM Component for Fadal CNC Machines
ITSCNC has announced the availability of the PUL-0099 Spindle Pulley (15K Polychain), an OEM replacement part designed for Fadal CNC machines. Engineered for optimal spindle performance, it supports speeds up to 15,000 RPM

May 1, 2026

ITSCNC Introduces Legacy Control Downgrade Kit – PCB-0283 for Fadal CNC System Compatibility
ITSCNC presents the PCB-0283 Legacy Control Downgrade Kit, a complete solution for transitioning Fadal CNC machines from Super CPU to the 1400-5C system, ensuring compatibility, reliability, and seamless performance.

April 24, 2026

ITSCNC Introduces Glentek AC Rotary Motor, TR65, VH65 – MTR-0143 for Enhanced CNC Performance
ITSCNC presents the Glentek AC Rotary Motor, TR65, VH65 – MTR-0143, a durable brushless motor designed for Fadal CNC machines, delivering extended lifespan, reduced wear, and reliable high-performance operation.

April 17, 2026

ITSCNC Introduces Fuse, MDA, 20 Amp – ELE-0035 for Reliable Fadal CNC Machine Protection
ITSCNC introduces the Fuse, MDA, 20 Amp – ELE-0035, a vital safety component for Fadal CNC machines. This slow-blow fuse protects against overloads and power surges, ensuring reliable performance.

April 2, 2026

High-Performance Remanufactured Spindle SPN-0006R Delivers Increased Speed, Durability, and Duty Cycle
ITSCNC launches the SPN-0006R 15K RPM remanufactured spindle, offering higher speed, durability, and precision. Designed as a direct upgrade for 10K spindles, it improves productivity and uptime with reliable performance for demanding CNC machining.

March 27, 2026

32GB USB Mass Storage Controller & Dual Serial Port for Fadal CNC Machines
Advanced USB Storage & Data Transfer Solution for Legacy Fadal Controls

March 19, 2026

ITSCNC Introduces HYD-0018 Hydraulic HI/LOW Actuator Field Repair Kit for Fadal CNC Machines
ITSCNC announces the HYD-0018 Hydraulic Actuator Field Repair Kit, a genuine Fadal OEM solution designed to restore actuator performance and simplify maintenance for Fadal CNC machines.

March 12, 2026

High-Performance Remanufactured Spindle SPN-0006R
ITSCNC launches the SPN-0006R 15K RPM remanufactured spindle, featuring ceramic bearings, a locking drawbar, and corrosion-resistant housing. It boosts CNC machining speed, durability, and productivity.

March 6, 2026

ITSCNC Announces PCB-0005R Mill Interface 1040-2A Reman for Fadal CNC Machines
ITSCNC introduces the PCB-0005R Mill Interface 1040-2A Reman, designed to ensure reliable communication, precise control, and improved performance in Fadal CNC milling operations.

February 25, 2026

The Complete Manual to the Fadal Locking Drawbar Assembly with Washers and Grease (DRB-0090-KIT)
The DRB-0090-KIT is a complete OEM Locking Drawbar Assembly with washers & grease for Fadal CNC machines. This genuine kit ensures optimal performance, reliability, and comes with a 90-day warranty from ITSCNC.

February 20, 2026

ITSCNC Introduces Fadal Color Video Interface PCB-0304 for Clear CNC Display Performance
ITSCNC announces the PCB-0304 Color Video Interface for Fadal CNC machines, offering stable video output, clear visuals, and reliable OEM compatibility for smoother daily operations.

February 11, 2026

ITSCNC Announces NEW 384KB Memory Expansion (PCB-0041) for Fadal CNC Machines
New 384KB OEM memory expansion for Fadal CNC boosts program capacity, speeds processing, and ensures reliable performance with ITS-certified quality and warranty for demanding machine shop operations.

February 6, 2026

Sony Floppy Disk Drive (ELE-0168) Offers Reliable Program Transfer for Fadal CNC Machines
Simple and dependable data storage solution for smooth CNC operations

January 30, 2026

ITSCNC Introduces MPG-0020 Dial for Fadal MP Remotes and MP Pendants
MPG-0020 Manual Pulse Generator Dial provides smooth and accurate manual control for Fadal CNC machines.

January 23, 2026

ITSCNC Introduces ELE-3210 Keyboard Pendant for Fadal 32MP CNC Controllers
ELE-3210 Keyboard Pendant delivers reliable control and smooth operation for Fadal CNC machines using 32MP controllers.

January 16, 2026

ITSCNC Launches MTR-0002 Glentek DC Axis Motor GM4050 for Fadal CNC Machines
MTR-0002 Glentek DC Axis Motor GM4050 delivers smooth motion, stable performance, and reliable torque for Fadal CNC machines.

January 9, 2026

ITSCNC Introduces CNT-0022 Liquid Ambient Temp Sensor for Fadal CNC Machines
CNT-0022 Liquid Ambient Temp Sensor ensures accurate coolant temperature control for Fadal CNC machines, preventing overheating and maintaining precision.

January 1, 2026

ITSCNC Announces Availability of Memory, 384KB, 1460-22, NEW (PCB-0041) for Fadal CNC Machines
Memory, 384KB, 1460-22, NEW (PCB-0041) is a genuine OEM Fadal memory expansion designed to boost CNC performance, support larger programs, and ensure smooth, reliable machine operation.

December 26, 2025

ITSCNC Introduces Genuine Fadal Spindle Motor Pulley, Polychain 1:1 (PUL-0024)
Genuine Fadal Spindle Motor Pulley, Polychain 1:1 (PUL-0024) ensures precise power transmission, reliable spindle control, and smooth CNC performance.

December 19, 2025

ELE-3210 Fadal 32MP Keyboard Kit – High-Quality CNC Pendant Replacement Part
The ELE-3210 is a high-quality Fadal 32MP keyboard pendant kit with bezel, ribbons, and hardware, designed for reliable CNC machine control, durability, and seamless operator performance.

December 12, 2025

ITSCNC Offers Reliable Replacement for Fadal CNC Machines with MTR-0180 Turret Motor
The MTR-0180 Turret Motor (DATC24 240V, 1/4 HP) is a direct-fit replacement for Fadal VMC3016-6535 machines, delivering smooth tool changes, reliable performance, and easy installation—backed by a 1-year warranty from ITSCNC.

December 5, 2025

ITSCNC Introduces High-Performance 4MB Memory Upgrade (PCB-0042) for Fadal CNC Machines
The PCB-0042 is a 4MB memory upgrade for Fadal CNC machines, enabling smoother processing of complex tasks. It improves speed, precision, and reliability, backed by ITSCNC’s warranty and expert support for dependable machine performance.

November 27, 2025

ITSCNC Introduces the USB-FADAL-KIT: A High-Performance 32GB USB Mass Storage Controller with Dual Serial Ports
The USB-FADAL-KIT is a high-performance 32GB USB Mass Storage Controller with dual serial ports designed for Fadal CNC machines. It enables fast program loading, advanced DNC functions, easy installation, and comes with a five-year warranty.

November 20, 2025

ITS CNC Launches Advanced AC Brushless Amplifier AMP-0040-ITS for Fadal VMC Machines
ITS CNC introduces the AMP-0040-ITS AC Brushless Amplifier, built for Fadal VMC machines using 8192-line motors. Offering 30 AMP continuous output, safety sensors, and a 1-year warranty.

November 12, 2025

Glentek Universal Spindle Drive (INV-0098G): Revolutionizing CNC Machine Performance from 5HP to 20HP
The Glentek Universal Spindle Drive (INV-0098G) is a 5HP–20HP Fadal replacement drive offering advanced DSP control, easy installation, and enhanced CNC motor efficiency and precision.

November 7, 2025

ITSCNC Introduces High-Precision Glentek AC Brushless Motor, 8192 Line, GM5060-75-E (MTR-0142) for Fadal VMCs
ITSCNC launches High-performance Glentek AC Brushless Motor MTR-0142 upgrade for Fadal VMC machines.

October 31, 2025

ITSCNC Launches PCB-0343 Keyboard Interface for Fadal CNC Machines (CNC88/MP, 1090-6F)
ITSCNC launches the PCB-0343 Keyboard Interface for Fadal CNC88/MP (1090-6F), offering OEM reliability, seamless control, and expert support to maximize CNC machine performance.

October 24, 2025

ITSCNC Announces the Availability of Genuine Fadal Spindle Motor Pulley 2 Belt, Pozi Drive (PUL-0019)
Discover the PUL-0019 Spindle Motor Pulley 2 Belt, Pozi Drive from ITSCNC—an OEM Fadal part ensuring precision, reliability, and smooth spindle performance with a 90-day warranty.

October 16, 2025

Introducing the Bison ATC Turret Motor, 60 RPM (MTR-0277): Enhancing CNC Efficiency and Precision
The ATC Turret Motor, 60 RPM, Bison (MTR-0277) by ITSCNC is a durable, high-performance replacement for Fadal CNC Machines, ensuring precise tool changes and reliable machining efficiency.

October 10, 2025

ITS Launches New Fadal Spindle: 10K Grease Pack with Locking Drawbar – SPN-0336-ITS
ITSCNC introduces the SPN-0336-ITS Fadal spindle: 10K Grease Pack with Locking Drawbar, built for precision, durability & full support.

October 1, 2025

Upgrade Your Z-Axis Tool Room Mill with Glentek AC Amplifier, AMP-0093
The Glentek AC Amplifier, AMP-0093, boosts Z-Axis TRM mill performance with 8192-line encoder, fault LEDs, and reliable continuous & peak current output for Fadal CNC machines.

September 24, 2025

ITS Unveils New Fadal Spindle: 10K Grease Pack with Locking Drawbar – SPN-0336-ITS
The Spindle, 10K Grease Pack with Locking Drawbar (SPN-0336-ITS) from ITSCNC delivers precision, durability, and long-lasting performance for Fadal machines with full support and warranty.

September 18, 2025

Fadal Introduces High-Performance Turret Carrier, 21 Position BT, with 42 Roll Pins (ATC-0010)
Fadal’s Turret Carrier, 21 Position BT, with 42 Roll Pins (ATC-0010) ensures precision, durability, and efficiency in CNC machining, delivering reliable tool positioning and performance.

September 11, 2025

ITSCNC Announces the Availability of the New PCB-0206 (1030-1C) Computer Interface for Fadal CNC Machines
New PCB-0206 (1030-1C) Computer Interface for Fadal CNC machines ensures seamless communication between computer systems & mechanical components. Genuine part with 1-year warranty.

September 4, 2025

Glentek Introduces the GM4050 DC Axis Motor (MTR-0002): Engineered for Stability and Smooth Operation in Demanding Industrial Applications
The GM4050-38 motor utilizes a traditional ferrite magnet design, offering a cost-effective solution without compromising performance.

August 28, 2025

The Complete Manual to the Fadal Locking Drawbar Assembly with Washers and Grease (DRB-0090-KIT)
The DRB-0090-KIT is a complete OEM Locking Drawbar Assembly with washers & grease for Fadal CNC machines. This genuine kit ensures optimal performance, reliability, and comes with a 90-day warranty from ITSCNC.

August 21, 2025

ITSCNC Introduces the PCB-0282-DC2 Legacy Upgrade Kit: Modernize Your Fadal CNC Machine from 1400-2 to 1400-5C
Upgrade Fadal CNC with PCB-0282-DC2 Legacy Kit—boost 1400-2 to 1400-5C for better precision & reliability. Warranty & support included!

August 13, 2025

Glentek Universal Spindle Drive (5HP-20HP) – The Ultimate Fadal CNC Replacement Solution (Part No:INV-0098G)
Glentek’s Universal Spindle Drive (5HP-20HP, #INV-0098G) boosts Fadal CNC performance with precision torque, easy setup & energy efficiency.

August 7, 2025

ITS CNC Introduces New Fadal Grease Pack Spindle with Locking Drawbar – SPN-0336-ITS
ITS CNC launches new Fadal Grease Pack Spindle SPN-0336-ITS—10K RPM, Locking Drawbar, NSK bearings, 1-year warranty. Durable, high-performance replacement.

July 31, 2025

ITSCNC Introduces High-Performance Fadal Spindle – SPN-0107R – 15K Air/Oil with Locking Drawbar, Now Available Remanufactured
Fadal SPN-0107R Spindle – 15K Air/Oil, Locking Drawbar, Reman. High-speed 15K RPM, ceramic bearings, 1-year warranty. Reliable CNC performance!

July 24, 2025

ITS CNC Introduces New Fadal Grease Pack Spindle – SPN-0336-ITS – Featuring 10K RPM Capability & Locking Drawbar
ITS CNC launches new SPN-0336-ITS Fadal Grease Pack Spindle—10K RPM, locking drawbar, polished housing, 1-year warranty. Built for durability!

July 17, 2025

Introducing the Fadal 15HP Spindle Motor With Encoder (MTR-0282) – The Ultimate Replacement for All 15HP Motors
Upgrade your Fadal CNC with the MTR-0282 15HP Spindle Motor—high-performance, encoder-equipped, replaces all 15HP motors. OEM quality, 1-year warranty.

July 10, 2025

ITS CNC Introduces New Fadal Grease Pack Spindle with Locking Drawbar – SPN-0336-ITS – Precision Engineered for Longevity & Performance
ITS CNC launches new Fadal 10K Grease Pack Spindle (SPN-0336-ITS) with locking drawbar, NSK bearings, polished housing & 1-year warranty. Durable, high-performance replacement.

July 3, 2025

ITSCNC Introduces Premium NSK Ballscrew Assembly for Y-Axis in Fadal CNC Machines – BLS-0000N-ASS Now Available
NSK BLS-0000N-ASS Ballscrew for Y-Axis in Fadal VMCs offers C5 accuracy, low backlash, and USA-made quality—now available at ITSCNC.

June 27, 2025

Fadal ITS Brushless AC Amplifier (AMP-0040-ITS) - The Ultimate CNC Axis Power Solution
Upgrade your Fadal with AMP-0040-ITS Brushless Amplifier—motor short protection, 2x faster servo, 1-year warranty. Smarter than standard amplifiers.

June 20, 2025

Fadal Keyboard Interface (PCB-0343) for CNC88/MP Systems: The Complete Guide
Fadal PCB-0343 Keyboard Interface for CNC88/MP systems. ITS-certified replacement for 1090-3A/3B models. 1-year warranty. Restores precise machine control.

June 12, 2025

Fadal Glentek Universal Spindle Drive (INV-0098G) Technical Guide
The Glentek INV-0098G Universal Spindle Drive provides Fadal owners with an advanced, cost-effective solution for spindle drive replacement. Contact us, We can provide specific guidance for your machine configuration and application requirements.

June 5, 2025

Streamline Your CNC Workflow with the Fadal USB Mass Storage Controller (USB-FADAL-KIT)
Upgrade your Fadal CNC system today with the USB-FADAL-KIT and take control of your file management like never before.

May 29, 2025

The Essential Guide to Fadal Program Module (PCB-0159) with Software V103.5
The Fadal Program Module (PCB-0159) with V103.5 software ensures stable CNC control. Learn installation, maintenance, and troubleshooting for optimal performance. 1-year warranty & ITS-certified.

May 23, 2025

The Complete Guide to Fadal Spindle Motor Encoders (ENC-0004): Precision, Testing & Maintenance
Fadal spindle acting up? Your 1000-line Accu-Coder (ENC-0004) might be failing. Learn how to test it (even without an oscilloscope!) and why OEM matters. 90-day warranty.

May 15, 2025

 171 1234