Jpinstruments · Newsroom
Top 10 tips on installation of TIT Probe in an Aircraft
Ideally, do not splice thermocouple wire using copper wire. We also do not recommend soldering the thermocouple wire.December 27, 2018
EDM 350 System and How it works ?
Fitting the EDM 350 is as easy as can be – first, attach all the probes to the engine and thread them out of the empty space 3.25-inch space.December 18, 2018
Installation of CHT Bayonet Probe in Aircraft
The CHT Bayonet probes are the threaded probes and are commonly known as ‘CHT Bayonet Probes’. These are typically used on Lycoming engines in aircraft.December 10, 2018
Aircraft Engine Monitor keeps your engine healthy, efficient and safe
Manufacturers such as J.P. Instruments of USA, not only make aircraft engine monitors and quality Airplane Digital Gauges, they also have also included artificial intelligence into the display units to warn the pilot(s).November 22, 2018
Slim-line Gauges - Their Usefulness in Aircraft
The difference between slim line and EDM is that each slimline gauge usually displayed one piece of information.November 5, 2018
What are the Specifications & Features of EDM 800 in Aircraft?
The all new EDM 800 provides you with a full-time in-flight readout of aircraft engine horsepower – this helps the pilot achieve maximum engine performance.September 21, 2018
Installation of Engine Data Management 700 (EDM 700) System in Aircraft
The JPI warranty at the back of the instruction manual clearly states that JPI will replace defective parts under warranty, it does not cover mishandling or defective installation.
September 5, 2018
What are the key features of CRB Probe?
The CRB Probes being delicate, should be handled with kid gloves i.e. fit it gently but firmly avoiding the use of harsh tools such as hammer or pliers.
August 27, 2018
Optimization and Characterization of EDM 790 System
The EDM 790’s accuracy stems from its linearized thermocouples. There is nothing in the aviation market that compares to J.P.I’s linearized accuracy.August 17, 2018
How Slim-line Tach Gauges Works in Aircraft?
Each slimline gauge usually displayed one piece of information. So, you had a slimline gauge for Oil Temp, OAT, RPM, Voltage, Manifold Pressure Sensor, OIL Pressure and so forth.August 8, 2018
Characteristics and Operation of EDM-960 System in Aircraft
The EDM 960 System acts like your very own flight engineer – one that never feels drowsy or sleeps during a flight.July 31, 2018
How Slim Line Gauges works in Aircraft?
The new sensors became ultra slimline, responded to changes very fast and became more accurate. Simultaneously, the cables that transmitted the data too became ‘Slimline’ and interference-free.July 12, 2018
Installation of RPM Sensor for Bendix Mag in Aircraft
One of the main reasons the Bendix Magnetos are popular is because they are easily overhauled and for any aircraft; this is a winning feature as it saves time and money.July 4, 2018
Working & Features of Oil Temp Probe in Aircraft
Once the mechanic completes his task, it is best if the gauge, Aircraft Sensor Systems and interconnect wiring be calibrated by a qualified technician or agency before flight.June 26, 2018
Features and Specifications of CDT Probe in Aircraft
The purpose of wanting to know the discharge temperature of the aircraft compressor is to prevent the possibility of detonation brought about by excessive heat in the compressor of the aircraft.June 4, 2018
What is Manifold Pressure Sensor in Aircraft?
The cylinders in any aircraft engine are like a large suction pump because the cylinders are constantly sucking air into itself.May 25, 2018
What is a Fuel Flow Transducer in Aircraft?
The fuel flow transducer works upon a vane RPM Sensor that is usually located behind the fuel filter and works in combination with the manifold air pressure (MAP).May 17, 2018
Engine Data Monitor 730 System vs EDM 830
Face is offset from centre to better fit in spaces where other equipment is currently located.April 30, 2018
What are the Features and Specification of EDM 830 System?
Little wonder then, the EDM 830 manufactured by J.P. Instruments is amongst the best aircraft EDM’s on the market today.April 19, 2018
Key Features of RPM Standard Sensor in Aircraft
From the year 2002 onwards, IO-550 magnetos usually have a compatible RPM sensor installed (running on 5v), but you can opt for the better-quality RPM standard sensor manufactured by JPI.April 11, 2018
How to Install Fuel Flow Transducer 201B in Aircraft?
The CDT probe which measure the air temperature flowing over it.April 3, 2018
Features & Specification of EDM 960 Twin System
The EDM 960 actively monitors the aircraft engine four times per second and sound/ display a warning if any part of the aircraft engine does not confirm to the pre-set parameters.March 28, 2018
Usage and Significance of CDT Probe in Aircraft
The purpose of wanting to know the comp discharge temp is to prevent chances of detonation that can happen due to excessive heat.March 20, 2018
JP Instruments EDM-740 - Colour Engine Monitor for Experimental Aircraft
Aircraft Engine Data Manager 740 for experimental aircraft is an awesome product that is innovative and aggressively priced.March 1, 2018
What Are The Features And Specifications Of EDM 700?
The EDM 700 system is also able to instantly give warning when programmed limits are exceeded. This is possible because it is equipped with an up to date warning system.January 8, 2018
How Do Aircraft Fuel Flow Indicators Work?
These devices are called fuel flow indicators. They operate on several basic principles that are all aimed at determining the precise level of fuel in an aircraft.
December 29, 2017
Aircraft Instruments Use for Characterization Of Aerosol Optical Properties
Instruments essentially concern measurement. Common aircraft measurements include fuel consumption, direction, position, speed, and altitude.
December 20, 2017
How Aircraft Fuel Flow Indicators Work?
The fuel balance indicator and fuel flow indicator looked a little more complex than your average car fuel indicator but the essential functionality was the same.November 22, 2017
How Aircraft Monitoring Systems Works?
J.P.Instruments has been around since 1986 and has provided excellent quality monitoring systems.November 14, 2017
Get Accurate Information & Save Panel Space in Aircraft with Slim Line Instruments
SlimLine supplies for Experimental and Certified, FAA-approved aircraft.November 6, 2017
Aircraft Engine Analyzer - Best Engine Monitors To Keep Your Engine Healthy, Efficient & Safe
The best kind of Aircraft Engine Analyzer is the one that displays cylinder head temperature (CHT) and exhaust gas temperature (EGT) on all present cylinders.October 27, 2017
Importance of an Aircraft Sensor System in Airplane
The aircraft uses hundreds of kilometers of sensors throughout its structure and for different types of systems and components.October 17, 2017
The Functions & Working of Aircraft Sensor Systems
The temperature sensors are found in the temperature detector. Thermal reading of given units is calibrated by these sensors.
October 10, 2017
How Aircraft Engine Monitors Works?
Aircraft engines are usually equipped with fans in the front of the engine which forces cold air through the inlet to the engine.October 2, 2017
What Are The Features And Specifications Of EDM 700 Systems?
The EDM 700 System is also capable of displaying temperature in an analog format and digitally.September 22, 2017
When the Digital EGT Gauge Is Said To Be Excessively Hot & How It’s Work?
A pilot or a driver is able to acquire the thought concerning the Air-fuel proportion of the vehicle by taking an observation of the EGT.September 15, 2017
Usage and Significance of Probes & Sensors In Aircraft System
JPI remains committed to providing customers with highest quality products and service and customer service remains its priority.August 29, 2017
What are the Features of EGT Probe & How It Works?
The sensor is usually connected to a Fuel Gauges that registers the level of temperature that is generated during the throttle or normal functioning of the engine.August 3, 2017
How RPM Sensor Is Important In Aircraft System?
This specific instrument measures the RPM of the Bendix in the Magneto, or the Bendix inside the Slick Magneto.July 25, 2017
EDM 700 - Most Advanced Aircraft Engine-Monitoring Instrument
The EDM 700 is crafted to assist you in monitoring all the microsystems within your aircraft to ensure they are functioning properly.June 26, 2017
Why the Vital Role of Sensors in an Aircraft Engine Monitoring and Control
These sensors provide instant feedback to the computers in the plane and controllers.June 9, 2017
The Functions & Working of an Aircraft Sensor System
These sensors work to calibrate the thermal reading of given units in an engine of an aircraft.June 2, 2017
How EGT Gauges Will Affect the Engine Performance
JP Instruments only sells you the best quality tools and products on the market today.May 19, 2017
Fuel Efficiency and Safety with JPI’s Proven Aircraft Fuel Flow Instruments
JP Instruments only sells you the best quality tools and products on the market today.May 15, 2017
Fuel Flow Instruments - How It Is Performing During the Flight
Fuel flow instruments allow pilots to pump, manage, and provide fuel to the propulsion system and Auxiliary Power Unit of an aircraft.May 8, 2017
How Does The Digital EGT Gauge Actually Works?
JPI makes sure that its customers are aware that it is striving to attain their satisfaction by providing quality products and services.April 28, 2017
How Does Aircraft Gauge Work in An Aircraft?
JPI makes sure that its customers are aware that it is striving to attain their satisfaction by providing quality products and services.April 18, 2017
How Does Aircraft Level Sensors Work In An Aircraft?
Being a professional in aircraft area, you should know more about aircraft level sensors, how do they work and where you can find quality and safe aircraft gauges.April 7, 2017
Gauges For Single And Twin Engine Aircraft
J.P. Instruments knows how important value and quality are and that is why they have many different options of products for you to choose from.March 24, 2017
Working Principle of Exhaust Gas Temperature Gauges
J.P. Instruments knows how important value and quality are and that is why they have many different options of products for you to choose from.March 8, 2017