Why InnoChill™ Is Ideal for Cryptocurrency Mining
Crypto mining farms run GPUs/ASICs at sustained high load—generating constant heat that throttles performance and shortens hardware life. InnoChill™ Immersion Cooling Fluid offers:
High thermal performance: Typical thermal conductivity 0.145–0.155 W/m·K to quickly absorb and dissipate heat under continuous loads.
Electrical safety: Dielectric strength >40 kV/mm helps protect boards and connectors even in dense tank layouts.
Lower total cost: Priced competitively vs. specialty fluorinated fluids and engineered for long service life to reduce fluid replacement and maintenance.
Sustainability-minded choice: Non-fluorinated formulation options available.
Learn more about the fluid: InnoChill Immersion Cooling Fluid
See related deployments: Use Cases: AI/HPC • Use Cases: Crypto Mining

Key Benefits for Mining Operations
Cut Cooling Opex: Lower $/L and efficient heat removal help reduce power draw from air handlers and CRAC/CRAH.
Extend Hardware Life: Stable, uniform temperatures minimize thermal cycling stress on GPUs/ASICs, VRMs, and memory.
Densify Without Throttling: Keep clocks high even in compact tanks and racks.
Simplify Maintenance: Long fluid life means fewer swaps and less downtime.

InnoChill™ vs Common Alternatives (Indicative)
Parameter InnoChill™ 3M Fluorinert™* Mineral Oil Engineered Fluids EC-12
Thermal Conductivity (W/m·K) 0.145–0.155 ~0.060 ~0.130 ~0.130
Dielectric Strength (kV/mm) >40 >35 >20 >20
Typical Service Life (years) 10+ 5–7 5–7 3–5
GWP (relative) Low (non-fluorinated) Very high (PFC-based) Low–Moderate Low–Moderate
Typical Price (per gal) Value-priced Premium Low Mid–High
*Fluorinert™ is a 3M trademark. Prices and values are indicative and vary by region, grade, and supplier.

Quick Implementation Tips
Single-phase immersion: Recommended for mining (simpler, safer).
Fill ratio: Typically 70–85% of tank volume to cover tall cards and risers.
Materials compatibility: Use sealed fans (or remove), avoid PVC; prefer PTFE, PBT, PPS, stainless steel, anodized aluminum, EPDM/NBR seals.
Heat rejection: Pair with dry coolers or fluid-to-water HX loops.
Monitoring: Track fluid conductivity, particulates, and temperature deltas across the loop.
Get setup guidance: Immersion Cooling Setup Guide
Download docs: Technical Data Sheet • Safety Data Sheet

FAQ
Will immersion damage my GPUs/ASICs?
Not when done correctly with a proper dielectric fluid, compatible materials, and good filtration. Many miners report lower failure rates vs. air.
Can I reuse the fluid when upgrading rigs?
Yes—filter and re-qualify (conductivity/particulates) before refilling.
How much can immersion cut energy use?
Savings vary by climate and system design, but miners often reduce cooling power substantially by eliminating/reducing chillers and high-pressure air.
See more answers: Immersion Cooling FAQ

Call to Action
Cut your cooling costs and extend hardware life—Request an InnoChill™ Quote today.

Contact Information
InnoChill
📧 Email: [email protected]
📞 Phone / WeChat: +86-135-4070-2776
🌐 Website: www.innochill.com